Illinois' reply to Maxwell's Request for Graphics Information,

NIC Document 14925.

This is a reply to Craig Maxwell's (UCLA-NMC) "Request for graphics

information" of 3/7/73. Further details can be obtained by contacting

me directly.

To date, our work in graphics has been primarily centered about support

for several applications groups. To make the generation of beam-

oriented graphics as painless as possible for these groups, our policy

for supporting this type of graphics has been to emulate as closely as

possible the CALCOMP plotter support package on the host machine, but

with NGP0 output. (Presently, before the resulting NGP can be sent to

some of our peripherals, e.g., Gould 4800, it must be converted to

device specifics. With the advent of ANTS MARK II and a PDP-11/45, all

conversions will be handled locally, so all graphics flowing into our

system will be NGP). We find this approach very labor-saving, even at

the present slightly kludgey level.

We also have some grey-scale work taking place on our GOULD and IMLAC.

One group is processing satellite pictures on Illiac and will soon need

grey-scale output, another is producing natural-resource maps, and a

third is generating holograms. No standardization plans have been made

for grey scale work, but if an acceptable standard is established, we

will most likely use it.

A small group, including myself, is currently planning an interactive

graphics system. The system will use multiple hosts, possibly using a

remote E&S machine for rotation, scaling, etc. We have a number of

large hurdles that have to be jumped before we can do anything, though.

Several of these are not graphics-specific, such as process-controlled

FTP, inter-process coordination among hosts, and others. We had

intended to let efficiency dictate the format of intermediate results

shipped via the Net, with standardization being applied where it is

helpful for minimizing effort. Since the system will be highly

interactive and will also manipulate grey-scale data, we will need a

higher level of graphics protocol to handle the user interface. A

"proto-prototype" system is being used now to do some simple

manipulations of meteorological data (e.g., contouring, 3-D plotting)

---

Page 2

with an IMLAC passively displaying the NGP0 pictures created. Soon, I

hope to finish an IMLAC program that will handle some interaction with

the mouse/keyset. I have decided to implement the following (outgoing)

commands.

MOVE beam to mouse position

DRAW from last to present beam position.

TEXT at present beam position.

UNDO the last command (to facilitate freehand drawing and backspacing in TEXT).

Other commands may be implemented as needed to do what people want to

do, at least until an adequate interaction standard comes along.

Note that there is implicit in the UNDO command the assumption that

the other end of the line possesses a certain amount of memory and

intelligence. Two possible philosophies for standardizing interaction

are that (1) all "nodes" ("generators" or "users" of data) understand

some set of commands and possess at least a certain amount of

intelligence, and (2) a distinction is made between "displays" and

"computers" (quotes because the line is fuzzy). I favor the first for

its generality, but I suggest that the lowest level of interactive

graphics might want to use the second for ease of implementation with

unintelligent devices, e.g., COMPUTEK 400's. (I do not mean to

imply in (1) that the actual "computer" would not have a larger

vocabulary than the actual "display" --this is inevitable with higher

level capabilities in the protocol).

Since we have almost no local computing power for applications work,

all our graphics computation is done remotely (our work has been

primarily at UCSD (B6700), USC-ISI (TENEX), and UCLA-CCN (360)).

Because we do our work at scattered sites and are basically economic

of labor (pronounced "lazy"), we have a lot to gain by standards and

will be glad to cooperate as much as possible with standardization

efforts.

Steve Bunch

[ This RFC was put into machine readable form for entry ]

       [ into the online RFC archives by Alex McKenzie with    ]
       [ support from GTE, formerly BBN Corp.             9/99 ]

---