|
Network Working Group Request for Comments: 4401 Category: Standards Track |
N. Williams Sun Microsystems February 2006 |
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Copyright © The Internet Society (2006).
This document defines a Pseudo-Random Function (PRF) extension to the Generic Security Service Application Program Interface (GSS-API) for keying application protocols given an established GSS-API security context. The primary intended use of this function is to key secure session layers that do not or cannot use GSS-API per-message message integrity check (MIC) and wrap tokens for session protection.
1. Introduction
1.1. Conventions Used in This Document
2. GSS_Pseudo_random()
2.1. C-Bindings
3. IANA Considerations
4. Security Considerations
5. References
5.1. Normative References
5.2. Informative References
A need has arisen for users of the GSS-API to key applications' cryptographic protocols using established GSS-API security contexts. Such applications can use the GSS-API [RFC2743] for authentication, but not for transport security (for whatever reasons), and since the GSS-API does not provide a method for obtaining keying material from established security contexts, such applications cannot make effective use of the GSS-API.
To address this need, we define a pseudo-random function (PRF) extension to the GSS-API.
Though this document specifies an abstract API as an extension to the GSS-API version 2, update 1, and though it specifies the bindings of this extension for the C programming language, it does not specify a revision of the GSS-API and so does not address the matter of how portable applications detect support for and ensure access to this extension. We defer this matter to an expected, comprehensive update to the GSS-API.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
Inputs:
Outputs:
Return major_status codes:
This function applies the established context's mechanism's keyed pseudo-random function (PRF) to the input data ('prf_in'), keyed with key material associated with the given security context and identified by 'prf_key', and outputs the resulting octet string ('prf_out') of desired_output_len length.
The minimum input data length is one octet.
Mechanisms MUST be able to consume all the provided prf_in input data that is 2^14 or fewer octets.
If a mechanism cannot consume as much input data as provided by the caller, then GSS_Pseudo_random() MUST return GSS_S_FAILURE.
The minimum desired_output_len is one.
Mechanisms MUST be able to output at least up to 2^14 octets.
If the implementation cannot produce the desired output due to lack of resources, then it MUST return GSS_S_FAILURE and MUST set a suitable minor status code.
The prf_key can take on the following values: GSS_C_PRF_KEY_FULL, GSS_C_PRF_KEY_PARTIAL, or mechanism-specific values, if any. This parameter is intended to distinguish between the best cryptographic keys that may be available only after full security context establishment and keys that may be available prior to full security context establishment. For some mechanisms, or contexts, those two
prf_key values MAY refer to the same cryptographic keys; for mechanisms like the Kerberos V GSS-API mechanism [RFC1964] where one peer may assert a key that may be considered better than the others they MAY be different keys.
GSS_C_PRF_KEY_PARTIAL corresponds to a key that would have been used while the security context was partially established, even if it is fully established when GSS_Pseudo_random() is actually called. Mechanism-specific prf_key values are intended to refer to any other keys that may be available.
The GSS_C_PRF_KEY_FULL value corresponds to the best key available for fully-established security contexts.
GSS_Pseudo_random() has the following properties:
_same results_ for both, the initiator and acceptor, even if
called multiple times (as long as the security context is not
expired).
#define GSS_C_PRF_KEY_FULL 0 #define GSS_C_PRF_KEY_PARTIAL 1
OM_uint32 gss_pseudo_random(
OM_uint32 *minor_status,
gss_ctx_id_t context,
int prf_key,
const gss_buffer_t prf_in,
ssize_t desired_output_len,
gss_buffer_t prf_out
);
Additional major status codes for the C-bindings:
See [RFC2744].
This document has no IANA considerations currently. If and when a relevant IANA registry of GSS-API symbols is created, then the generic and language-specific function names, constant names, and constant values described above should be added to such a registry.
Care should be taken in properly designing a mechanism's PRF function.
GSS mechanisms' PRF functions should use a key derived from contexts' authenticated session keys and should preserve the forward security properties of the mechanisms' key exchanges.
Some mechanisms may support the GSS PRF function with security contexts that are not fully established, but applications MUST assume that authentication, mutual or otherwise, has not completed until the security context is fully established.
Callers of GSS_Pseudo_random() should avoid accidentally calling it with the same inputs. One useful technique is to prepend to the prf_in input string, by convention, a string indicating the intended purpose of the PRF output in such a way that unique contexts in which the function is called yield unique inputs to it.
Pseudo-random functions are, by their nature, capable of producing only limited amounts of cryptographically secure output. The exact amount of output that one can safely use, unfortunately, varies from one PRF to another (which prevents us from recommending specific numbers). Because of this, we recommend that unless you really know what you are doing (i.e., you are a cryptographer and are qualified to pass judgement on cryptographic functions in areas of period, presence of short cycles, etc.), you limit the amount of the PRF output used to the necessary minimum. See [RFC4086] for more information about "Randomness Requirements for Security".
For some mechanisms, the computational cost of computing
GSS_Pseudo_random() may increase significantly as the length of the
prf_in data and/or the desired_output_length increase. This means
that if an application can be tricked into providing very large input
octet strings and requesting very long output octet strings, then
that may constitute a denial of service attack on the application;
therefore, applications SHOULD place appropriate limits on the size
of any input octet strings received from their peers without
integrity protection.
[GGM1] Goldreich, O., Goldwasser, S., and S. Micali, "How to
Construct Random Functions", Journal of the ACM, October
1986.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2743] Linn, J., "Generic Security Service Application Program Interface Version 2, Update 1", RFC 2743, January 2000.
[RFC2744] Wray, J., "Generic Security Service API Version 2 : C-bindings", RFC 2744, January 2000.
[GGM2] Goldreich, O., Goldwasser, S., and S. Micali, "On the
Cryptographic Applications of Random Functions",
Proceedings of CRYPTO 84 on Advances in cryptology, 1985.
[RFC4086] Eastlake, D., 3rd, Schiller, J., and S. Crocker, "Randomness Requirements for Security", BCP 106, RFC 4086, June 2005.
[RFC1964] Linn, J., "The Kerberos Version 5 GSS-API Mechanism", RFC 1964, June 1996.
Nicolas Williams
Sun Microsystems
5300 Riata Trace Ct
Austin, TX 78727
US
EMail: Nicolas.Williams@sun.com
Copyright © The Internet Society (2006).
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.
Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA).