|
Network Working Group Request for Comments: 3950 Obsoletes: 3250 Category: Standards Track |
L. McIntyre Consultant G. Parsons Nortel Networks J. Rafferty Brooktrout Technology February 2005 |
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Copyright © The Internet Society (2005).
This document describes the registration of the MIME sub-type image/tiff-fx. The encodings are defined by File Format for Internet Fax and its extensions.
This document describes the registration of the MIME sub-type image/tiff-fx. The encodings are defined by File Format for Internet Fax [TIFF-FX] and its extensions.
This document is a product of the IETF Internet Fax Working Group.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, RFC 2119 [REQ].
Tag Image File Format Fax eXtended (TIFF-FX), is defined in detail by RFC 3949, "File Format for Internet Fax" [TIFF-FX].
While a brief scope and feature description is provided in this section as background information, the reader is directed to the original TIFF-FX specification (File Format for Internet Fax) to obtain complete feature and technical details.
This document defines a TIFF-based file format specification for enabling standardized messaging-based fax over the Internet. It specifies the TIFF fields and field values required for compatibility with the existing ITU-T Recommendations for Group 3 black-and-white, grayscale and color facsimile. TIFF has historically been used for handling fax image files in applications such as store-and-forward messaging. Implementations that support this file format specification for import/export may elect to support it as a native format. This document recommends a TIFF file structure that is compatible with low-memory and page-level streaming implementations.
Unless otherwise noted, the current TIFF specification [TIFF] and
selected TIFF Technical Notes [TTN1, TTN2] are the primary references
for describing TIFF and defining TIFF fields. This document is the
primary reference for defining TIFF field values for fax
applications.
Some of the features of TIFF-FX are:
- TIFF-FX is capable of describing bilevel, grayscale, palette-
color, full-color and mixed content image data.
- TIFF-FX includes a number of compression schemes that allow
developers to choose the best space or time tradeoff for their
applications.
- TIFF-FX is designed to be extensible and to evolve gracefully as
new needs arise.
This document defines the image/tiff-fx MIME sub-type to refer to TIFF-FX Profiles J, C, L and M encoded image data and any future TIFF-FX extensions, or a subset. The image/tiff-fx content type MAY be used when black-and-white image data is encoded using TIFF-FX Profiles S or F, or a subset, however, the image/tiff content type SHOULD be used.
To: ietf-types@iana.org
Subject: Registration of Standard MIME media type image/tiff-fx
MIME media type name: image
MIME subtype name: tiff-fx
Required parameters: none
Optional parameters: none
Encoding Considerations:
This media type consists of binary data. The base64 encoding should be used on transports that cannot accommodate binary data directly.
Security considerations:
TIFF-FX utilizes a structure which can store image data and attributes of this image data. The fields defined in the TIFF-FX specification are of a descriptive nature and provide information that is useful to facilitate viewing and rendering of images by a recipient. As such, the fields currently defined in the TIFF-FX specification do not in themselves create additional security risks, since the fields are not used to induce any particular behavior by the recipient application.
TIFF-FX has an extensible structure, so that it is theoretically
possible that fields could be defined in the future which could be
used to induce particular actions on the part of the recipient,
thus presenting additional security risks, but this type of
capability is not supported in the referenced TIFF-FX
specification. Indeed, the definition of fields which would
include such processing instructions is inconsistent with the
goals and spirit of the TIFF-FX specification.
The MIME type and file extension defined by this document MUST NOT be used to blindly select a processing program. It is up to the implementation to determine the application (if necessary) and render the image to the user.
Interoperability considerations:
The ability of implementations to handle all the defined applications (or profiles within applications) of TIFF-FX may not be ubiquitous. As a result, implementations may decode and attempt to display the encoded TIFF-FX image data only to determine that the image cannot be rendered.
Published specification:
TIFF-FX (Tag Image File Format Fax eXtended) is defined in:
RFC 3949, "File Format for Internet Fax", February 2005, Buckley, R., Venable, D., McIntyre, L., Parsons, G., and J. Rafferty.
Applications which use this media type:
Imaging, fax, messaging and multi-media
Additional information:
Magic number(s):
II (little-endian): 49 49 2A 00 hex
MM (big-endian): 4D 4D 00 2A hex
File extension(s): .TFX
Macintosh File Type Code(s): TFX
Person & email address to contact for further information:
Lloyd McIntyre
Lloyd_McIntyre@Dell.com
Glenn W. Parsons
gparsons@nortelnetworks.com
James Rafferty
jraff@brooktrout.com
Intended usage: COMMON
Change controller: Lloyd McIntyre
TIFF-FX utilizes a structure which can store image data and attributes of this image data. The fields defined in the TIFF-FX specification are of a descriptive nature and provide information that is useful to facilitate viewing and rendering of images by a recipient. As such, the fields currently defined in the TIFF-FX specification do not in themselves create additional security risks, since the fields are not used to induce any particular behavior by the recipient application.
TIFF-FX has an extensible structure, so that it is theoretically
possible that fields could be defined in the future which could be
used to induce particular actions on the part of the recipient, thus
presenting additional security risks, but this type of capability is
not supported in the referenced TIFF-FX specification. Indeed, the
definition of fields which would include such processing instructions
is inconsistent with the goals and spirit of the TIFF-FX
specification.
The MIME type and file extension defined by this document MUST NOT be used to blindly select a processing program. It is up to the implementation to determine the application (if necessary) and render the image to the user.
[TIFF-FX] Buckley, R., Venable, D., McIntyre, L., Parsons, G., and J. Rafferty, "File Format for Internet Fax", RFC 3949, February 2005.
[TIFF] Adobe Developers Association, TIFF (TM) Revision 6.0 -
Final, June 3, 1992.
[REQ] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[TTN1] Adobe PageMaker 6.0 TIFF Technical Notes, Sept. 14, 1995,
http://partners.adobe.com/asn/developer/pdfs/tn/TIFFPM6.pdf
[TTN2] Adobe Photoshop TIFF Technical Notes, Replacement TIFF/JPEG
specification, March 22, 2002,
http://partners.adobe.com/asn/developer/pdfs/tn/
TIFFphotoshop.pdf
+----+---------+-------------------------------------------------+ | No.| Section | Edit | +----+---------+-------------------------------------------------+ | 1. | All | Updated references from RFC 2301 to | | | | draft-ietf-fax-tiff-fx-13.txt | +----+---------+-------------------------------------------------+ | 2. | 5 | MIME Definition - added a "SHOULD" statement to | | | | stress that image/tiff is the preferred content | | | | type when representing Profiles S and/or F. | +----+---------+-------------------------------------------------+ | 3. | 7 | Revise security considerations. | +----+---------+-------------------------------------------------+ | 4. | 3 | Merged sections 2 & 3 and renumbered. | +----+---------+-------------------------------------------------+
Lloyd McIntyre
10328 S. Stelling Road
Cupertino, CA 95014 USA
Phone: +1-408-725-1624
EMail: lloyd10328@pacbell.net or
Lloyd_McIntyre@Dell.com
Glenn W. Parsons
Nortel Networks
Phone: +1-613-763-7582
Fax: +1-613-967-5060 EMail: gparsons@nortel.com
James Rafferty
Brooktrout Technology
410 First Avenue
Needham, MA 02494
USA
Phone: +1-781-433-9462
Fax: +1-781-433-9268 EMail: jraff@brooktrout.com
Copyright © The Internet Society (2005).
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the IETF's procedures with respect to rights in IETF Documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- ipr@ietf.org.
Funding for the RFC Editor function is currently provided by the Internet Society.